The Network Toolbar provides functions related to communications, configuration, maintenance, and testing of the system network (see System Network Considerations).
Network Toolbar function includes: Connect To System, Disconnect From System, Send Configuration, Start Audio, Stop Audio, HDCP Management, Device Maintenance, Equipment Table and Locate Devices.
Icon |
Name |
Description |
Establishes communication with, and retrieves data from, selected Tesira® systems on the network. Opens System Connect dialog box (see System Network Considerations and System Connect Considerations). Password protection is then available from the Tools Menu. When connected to a system, Component Object Properties may be changed, but system design (objects & connections) cannot. |
||
Ends communications with selected Tesira® systems on the network. System design data is retained in software after disconnect. See System Network Considerations |
||
Transmits system design data to selected Tesira® devices in the system. See System Network Considerations. Before data can be transmitted, a system design file (.TMF) must first be opened, then connected to a system, and have Tesira device IP addresses assigned (see Device Maintenance). Send Configuration will automatically Compile the system design, and reset the hardware devices, before sending the new configuration. |
||
Enables audio signal flow within the selected system. Start Audio is available only after Send Configuration has been successfully performed. See System Network Considerations. |
||
Disables audio signal flow within the selected system. See System Network Considerations. |
||
Manage HDCP |
Opens the Manage HDCP window to allow enabling or disabling HDCP state. See HDCP Management. |
|
Provides an editable table of network related settings for selected Tesira® devices. Opens Device Maintenance dialog box. Device Maintenance settings include Date/Time, IP Address, Description, Serial Number, Reset/Initialize, Update Firmware, and Disconnect From Network. See System Network Considerations. |
||
Equipment Table |
Correlates hardware components to the system design. See Equipment Table. |
|
Locate Devices |
Locate can be used to identify a device either on the network or via the software. See Locate Devices. |