Parlé Microphones
The Parlé TCM-1 is an AVB ceiling microphone for use in Tesira systems and is comprised of a pendant microphone and plenum box. The plenum box has an additional RJ-45 connector for daisy-chain connections of up to 2 additional microphones, for a total of 3 microphones (1 TCM-1 and 2 TCM-1EX).
The Parlé TCM-1A is an AVB ceiling microphone and PoE+ amplifier for use in Tesira systems and is comprised of a pendant microphone and plenum box. The plenum box is 2-channel PoE+ amplifier with an internal limiter, selectable power and is capable of operating in a burst mode to handle peak signals, providing up to 40 watts (4Ω load) or 30 watts (8Ω load) per channel. The plenum box has an additional RJ-45 connector for daisy-chain connections of up to 2 additional microphones, for a total of 3 microphones (1 TCM-1A and 2 TCM-1EX).
The Parlé TCM-1EX is an expansion ceiling microphone for use in Tesira systems and is comprised of a pendant microphone and plenum box. The TCM-1EX is intended to be used as a second and third microphone in conjunction with a TCM-1 or TCM-1A. The TCM-1EX cannot operate as a standalone device. The plenum box comes with an additional RJ-45 connector for daisy-chain connections. A maximum of three microphones are permitted per daisy chain (one TCM-1 or TCM-1A required, plus up to two TCM-1EX).
The Parlé TCM-X is an AVB ceiling microphone for use in Tesira systems and is comprised of a ceiling microphone and plenum box. Each plenum box has its own digital signal processing module and comes with an additional RJ-45 connector to add an optional TCM-XEX to the plenum box. A maximum of two microphones are permitted per plenum box (one TCM-X or TCM-XA with TCM-XEX).
The Parlé TCM--XA is an AVB low-profile ceiling microphone and PoE+ (IEEE 802.3at Class 4, 30W) amplifier for use in Tesira systems and is comprised of a ceiling microphone and plenum box. Each plenum box has its own digital signal processing module and comes with an additional RJ-45 connector to add an optional TCM-XEX. A maximum of two microphones are permitted per plenum box (one TCM-1 or TCM-1A with TCM-1EX).
The Parlé TCM-XEX is an expansion AVB low-profile ceiling microphone for use in Tesira systems. The TCM-XEX is intended to be used as a second microphone in conjunction with a TCM-X or TCM-XA, via an RJ-45 connector. The TCM-XEX cannot operate as a standalone device. A maximum of two microphones are permitted per box (one TCM-X or TCM-XA with TCM-XEX).
The Parlé TTM-X is an AVB low-profile tabletop microphone for use with Tesira systems. Comprised of a tabletop microphone and network box. Each network box has its own digital signal processing module and comes with an additional RJ-45 connector to add an optional TTM-XEX. A maximum of two microphones are permitted (one TTM-X with TTM-XEX).
The Parlé TTM-XEX is an AVB low-profile tabletop microphone for use with Tesira systems. The TTM-XEX is intended to be used as a second microphone in conjunction with TTM-X via an RJ-45 connector. The TTM-XEX cannot operate as a standalone device. A maximum of two microphones are permitted per box (one TTM-X with TTM-XEX).
See Parlé Microphone/Amplifier Wiring Diagrams for data on Parlé microphone topology.
Parlé TCM-1 Pendant Microphone
Specifications and Features
- Three 120° zones for 360° of coverage
- Audio and control networking over AVB
- Plenum box with additional RJ-45 for daisy-chain mic connections
- Adjustable microphone height
- Single cable installation
- LED status indicators (See Hardware Status Indicators)
- Acoustic Echo Cancelling (AEC) Technology
- Requires CAT5e cabling or better
Installation Distance Requirements
- 330 feet (100 meters) maximum from the switch to the TCM-1 plenum box
- 33 feet (10 meters) maximum between daisy-chain TCM plenum box(es)
- Microphone pendant cable length: adjustable to 9.8 feet (3 meters) maximum
Parlé TCM-1A Microphone and Amplifier
Specifications and Features
- PoE+ amplifier
- Two channel, 4 watts continuous power per channel
- Internal limiter
- Software-selectable power vs. channel count
- Three 120° zones for 360° of coverage
- Audio and control networking over AVB
- Plenum box with additional RJ-45 for daisy-chain mic connections
- Adjustable microphone height
- Single cable installation
- LED status and power indicators (See Hardware Status Indicators)
- Acoustic Echo Cancelling (AEC) Technology
- Requires CAT5e cabling or better
Installation Distance Requirements
- 330 feet (100 meters) maximum from the switch to the TCM-1 plenum box
- 33 feet (10 meters) maximum between daisy-chain TCM plenum box(es)
- Microphone pendant cable length: adjustable to 9.8 feet (3 meters) maximum
Parlé TCM-1EX Expander Microphone
Specifications and Features
- For use with TCM-1 or TCM-1A only
- Three 120° zones for 360° of coverage
- Audio and control networking over AVB
- Plenum box with two RJ-45s for daisy-chain mic connections
- Adjustable microphone height
- Single cable installation
- LED status indicators (mic and plenum)
- Acoustic Echo Cancelling (AEC) Technology
Installation Distance Requirements
- 33 feet (10 meters) maximum between daisy-chain TCM plenum box(es)
- Microphone pendant cable length: adjustable to 9.8 feet (3 meters) maximum
NOTE: TCM-1EX connections must be made with Cat.5e cabling (unshielded) or better.
Parlé TCM-X Ceiling Microphone
Specifications and Features
- Four 90° zones for 360° of coverage
- Audio and control networking over AVB
- Plenum box with additional RJ-45 to connect to TCM-XEX.
- Single cable installation
- LED status indicators (See Hardware Status Indicators)
- Acoustic Echo Cancelling (AEC) Technology
- Requires CAT5e cabling or better
Installation Distance Requirements
- 330 feet (100 meters) maximum from the switch to the TCM-X plenum box
- 33 feet (10 meters) maximum between TMC-X plenum box and TCM-XEX
- Height range from floor to ceiling is 6' 0" to 18' 0"
Parlé TCM-XA Microphone and Amplifier
Specifications and Features
- PoE+ amplifier
- Two channel, provides up to 40 watts (4Ω load) or 30 watts (8Ω load) of burst power per channel
- Internal limiter
- Software-selectable power vs. channel count
- Four 90° zones for 360° of coverage
- Audio and control networking over AVB
- Plenum box with additional RJ-45 to add an optional TCM-XEX
- Single cable installation
- LED status and power indicators (See Hardware Status Indicators)
- Acoustic Echo Cancelling (AEC) Technology
- Requires CAT5e cabling or better
Installation Distance Requirements
- 330 feet (100 meters) maximum from the switch to the TCM-XA plenum box
- 33 feet (10 meters) maximum between daisy-chain TCM-XA plenum box and TCM-XEX
- Height range from floor to ceiling is 6' 0" to 18' 0"
Parlé TCM-XEX Expander Microphone
Specifications and Features
- For use with TCM-X or TCM-XA only
- Four 90° zones for 360° of coverage
- Audio and control networking over AVB
- Plenum box with RJ-45 to connect to TCM-X or TCM-XA
- Single cable installation
- LED status indicators (mic and plenum box)
- Acoustic Echo Cancelling (AEC) Technology
Installation Distance Requirements
- 33 feet (10 meters) maximum between TCM-X plenum box and TCM-XEX
- Height range from floor to ceiling is 6' 0" to 18' 0"
NOTE: TCM-XEX connections must be made with Cat.5e cabling (unshielded) or better.
Parlé TTM-X Table Microphone
Specifications and Features
- Four 90° zones for 360° of coverage
- Audio and control networking over AVB/TSN
- Network box with additional RJ-45 to connect to TTM-XEX.
- Single cable installation
- LED status indicators (See Hardware Status Indicators)
- Acoustic Echo Cancelling (AEC) Technology
- Requires CAT5e cabling or better
Installation Distance Requirements
- 330 feet (100 meters) maximum from the switch to the TTM-X network box
- 33 feet (10 meters) maximum between TTM-X network box and TTM-XEX
Parlé TTM-XEX Expander Microphone
Specifications and Features
- For use with TTM-X only
- Four 90° zones for 360° of coverage
- Audio and control networking over AVB
- Network box with RJ-45 to connect to TTM-X
- Single cable installation
- LED status indicators (mic and network box)
- Acoustic Echo Cancelling (AEC) Technology
Installation Distance Requirements
- 330 feet (100 meters) maximum from the switch to the TTM-X network box
- 33 feet (10 meters) maximum between TTM-X network box and TTM-XEX
