Hardware Front Panel Status Lights

Server and Server I/O Front Panel

LED Off Green Yellow Red
Power Unit not powered Unit is powered Not applicable Not applicable
Alarm No device fault active Not applicable Minor device fault active Major device fault active
Activity Not applicable Device is an active part of an active system Not applicable Device is an inactive part of a system (Audio is stopped)
Status  Not applicable Device configured. Ready to participate in the system Device unconfigured. Ready to receive configuration Device not ready to receive its configuration
AIS (Alarm in System) No fault is active in any device in the system Not applicable Minor fault is active in a device in the system Major fault is active in a device in the system

 

TesiraFORTÉ Front Panel

LED Off Green Yellow Red
Power Unit not powered Unit is powered Not applicable Not applicable
Alarm No device fault active Not applicable Minor device fault active Major device fault active
Activity Not applicable Device is an active part of an active system Not applicable Device is an inactive part of a system (Audio is stopped)
Status  Not applicable Device configured. Ready to participate in the system Device unconfigured. Ready to receive configuration Device not ready to receive its configuration
AIS (Alarm in System) No fault is active in any device in the system Not applicable Minor fault is active in a device in the system Major fault is active in a device in the system

 

TesiraFORTÉ X Front Panel

LED Off

Green

Green Flashing Yellow Red
Power Unit not powered Unit is powered Not applicable Not applicable Not applicable
Alarm No Alarm Condition Present Not applicable Not applicable Minor device fault active Major device fault active
RJ45 Port Status Ethernet link is down Ethernet link is active Device is in Locate Mode (triggered from software) Not applicable Not applicable
Device Status Not applicable Device is fully booted/ready Device is in Locate Mode (triggered from software) Device is Booting Not applicable
Launch Not applicable Launch Succeeded Not applicable Launch required Launch failed

 

TesiraLUX Front Panel

LED Off Green Yellow Red
Power Unit not powered Unit is powered Not applicable Not applicable
Alarm No device fault active Not applicable Minor device fault active Major device fault active
Activity Not applicable Device is an active part of an active system Not applicable Device is an inactive part of a system (Audio is stopped)
Status  Not applicable Device configured. Ready to participate in the system Device unconfigured. Ready to receive configuration Device not ready to receive its configuration
AIS (Alarm in System) No fault is active in any device in the system Not applicable Minor fault is active in a device in the system Major fault is active in a device in the system

 

EX-AEC, EX-IN, EX-OUT and EX-IO and EX-MOD Front Panel

LED Off Green Yellow Red
Power Unit is not powered Unit is powered Not applicable Not applicable
Alarm No fault is active in the device Not applicable Minor fault active in the device Major fault active in the device
Activity Not applicable Device is an active part of an active system Not applicable Device is part of an inactive system (Audio is stopped)
Status  Not applicable Device has received configuration and is ready to participate in the system Device is ready and waiting to receive a configuration Device not ready to receive its configuration

 

Lab.gruppen amplifier Front Panel

Chassis Front Panel LED indicators

LED

Off

Green

Yellow

Red

Alarm

No Fault is active in the device

Not applicable

Minor fault is active in the device

Major fault is active in the device

Activity

Not applicable

The Host device is an active part of an active system

Not applicable

The Host device is  part of an inactive system

Status

Not applicable

Device has received its configuration and is ready to participate in the system

Device is ready and waiting to receive a configuration

Device is not ready to receive its configuration

Power

Device is powered Off

Power State is ON

Power State is STANDBY

Power State is SLEEP

 

Amplifier channel Front Panel LED indicators

LED

Off

Green

Yellow

Red

Load

Amplified Output Load Status UNKNOWN

Amplified Output Load Status OK

Amplified Output Load Status WARNING

Amplified Output Load Status ERROR

Amp

Amplified Output Amp Status UNKNOWN

Amplified Output Amp Status OK

Amplified Output Amp Status WARNING

Amplified Output Amp Status ERROR

Signal

Amplified Output Signal Status UNKNOWN

Amplified Output Signal Status OK

Amplified Output Signal Status WARNING

Amplified Output Signal Status ERROR

Mute

Power state is standby

Audio is not muted

Audio is muted

Not applicable

 

TesiraXEL 1200 Rack-Mount Amplifier Front Panel

Front Panel LED indicators

LED Off Green Yellow Red
Power Unit not Powered Unit is powered Unit is in low power 'sleep' mode

N/A

Alarm No device fault active

N/A

Minor device fault active Major device fault active
Activity

N/A

Device is an active part of an active system

N/A

Device is an inactive part of a system (Audio is stopped)
Status

N/A

Device configured. Ready to participate in the system Device unconfigured. Ready to receive configuration Device not ready to receive its configuration
AIS (Alarm in System) No fault is active in any device in the system

N/A

Minor fault is active in a device in the system Major fault is active in a device in the system

 

Per Channel LEDs

LED

Off

Green

Yellow

Red

Signal

Amp AVB Input Signal is not present.

Amp AVB Input Signal is present.

Amp Output Signal present and attenuating.

Amp Output Signal is present and clipping.

Fault

Device is in standby or channel is operating normally.

N/A

Channel is attenuated for device protection.

Channel is muted for device protection.

Automute

Channel is not in automute

N/A

Channel is in automute

N/A

Mute

Channel is not muted, or device is in standby.

N/A

N/A

Channel mute is activated.

Legacy Tesira Rack-Mount Amplifier Front Panel

Front Panel LED indicators

LED Off Green Yellow Red
Power Unit not Powered Unit is powered Unit is in standby Not applicable
Alarm No device fault active Not applicable Minor device fault active Major device fault active
Activity Not applicable Device is an active part of an active system Not applicable Device is an inactive part of a system (Audio is stopped)
Status Not applicable Device configured. Ready to participate in the system Device unconfigured. Ready to receive configuration Device not ready to receive its configuration
AIS (Alarm in System) No fault is active in any device in the system Not applicable Minor fault is active in a device in the system Major fault is active in a device in the system

 

Per Channel LEDs

LED

Off

Green

Yellow

Red

Signal

Amp AVB Input Signal is not present.

Amp AVB Input Signal is present.

Amp Output Signal present and attenuating.

Amp Output Signal is present and clipping.

Fault

Device is in standby or channel is operating normally.

N/A

Channel is attenuated for device protection.

Channel is muted for device protection.

Failover

Device isn’t using failover, or this channel has no failover input source assigned.

Signal is present on failover input.

Signal is present and Failover Mode Active

Signal is not present on failover input.

Mute

Channel is not muted, or device is in standby.

N/A

Chassis mute is activated, and channel mute is not.

Channel mute is activated.

EX-LOGIC Front Panel

LED

Off

Green

Yellow

Red

Power

Unit is not powered

Unit is powered

Not applicable

Not applicable

Alarm

No fault is active in the device

Not applicable

Minor fault active in the device

Major fault active in the device

Activity

Not applicable

Device is an active part of an active system

Not applicable

Device is part of an inactive system

Status

Not applicable

Device has received configuration and is ready to participate in the system

Device is ready and waiting to receive a configuration

Device not

ready to receive its configuration

 

Tesira Plenum-Mount Amplifier Front Panel

Tesira AMP-450P/450BP

LED

Off

Green

Yellow

Red

Flashing Green

Flashing Yellow

Flashing Red

Red & Yellow Flashing

Power

Unit is not powered

Unit is powered and has received all necessary configuration information and is ready to participate in its system

Unit is powered and ready to receive configuration information but has not yet received it or the unit is updating firmware

Unit is powered but not ready to receive configuration information

Amplifier is in Select/Locate mode  

Unit has minor alarm condition present

Unit has major alarm condition present

Unit has a major and minor alarm code present

Amp Status Unit is not powered or not ready to receive configuration information Unit is powered Amplifier limiter is engaged Amplifier detected a clip condition at output Amplifier is in Select/Locate mode Not Applicable

Amplifier has failed to initialize, has an error condition, or is temporarily muted due to an audio burst

PoE+ power is not available or insufficient to power the amplifier (unit is powered off)

 

Parlé Microphone Front Panel

TCM-1A/TCM-XA/TTM-X

LED

Off

Green

Yellow

Red

Flashing Green

Flashing Yellow

Flashing Red

Red & Yellow Flashing

Power

Unit is not powered

Unit is powered and has received all necessary configuration information and is ready to participate in its system

Unit is powered and ready to receive configuration information but has not yet received it or the unit is updating firmware

Unit is powered but not ready to receive configuration information

Amplifier is in Select/Locate mode  

Unit has minor alarm condition present

Unit has major alarm condition present

Unit has a major and minor alarm code present

Amp Status Unit is not powered or not ready to receive configuration information Unit is powered Amplifier limiter is engaged Amplifier detected a clip condition at output Amplifier is in Select/Locate mode Not Applicable Amplifier has failed to initialize, has an error condition, or is temporarily muted due to an audio burst

PoE+ power is not available or insufficient to power the Amplifier (unit is powered off)

Microphone* Unit is not powered or powered but unconfigured Unit is powered and operating normally Not Applicable Unit is muted Unit is in Select/Locate mode Not Applicable Unit has major alarm condition present

Not Applicable

* Microphone pendant and ceiling microphone LEDs can be logically controlled causing variation from the behavior documented in this table.

 

Tesira USB/Bluetooth Expander Front Panel

Tesira EX-UBT / EX-USB

LED

Off

Green

Yellow

Blue

Red

Flashing Green

Flashing Yellow

Flashing   Red

Flashing Blue

Power No power supplied Unit is powered and has received all necessary configuration information and is ready to participate in its system Unit is powered and ready to receive configuration information but has not yet received it or the unit is updating firmware Not Applicable   Unit is powered but not ready to receive configuration information Unit is in Select/Locate mode Unit has minor alarm condition present Unit has major alarm condition present Not Applicable  

Bluetooth

(EX-UBT Only)

Bluetooth disabled or the unit is in Select/Locate mode or the unit is updating firmware Not Applicable   Not Applicable   Bluetooth connected Bluetooth module fault detected – an error occurred during initialization or communications with the Bluetooth module failed Not Applicable   Not Applicable   Not Applicable   Bluetooth discoverable

 

TesiraCONNECT Expander Device

LED

Off

Green

Flashing Green

Yellow

Red

Alternating Red/Yellow

Power No power supplied Device is powered Unit is in Locate mode Unit is booting Not Applicable Not Applicable
Status No power supplied Unit is fully booted and ready Unit is in Locate mode Unit is booting Not Applicable Not Applicable
Alarm No alarm condition present Not Applicable   Unit is in Locate mode Unit has minor alarm condition present Unit has major alarm condition present Unit has minor and major alarm condition present
Per-Port LED No Ethernet link Ethernet link active/up Unit is in Locate mode Not Applicable Not Applicable Not Applicable
RJ45 No Ethernet link Ethernet link active/up Data activity Not Applicable Not Applicable Not Applicable