ATND8734 Dante Enabled Microphone

The ATND8734 is a Dante-enabled wall/ceiling plate power module designed for use with gooseneck and hanging microphones that have a TA3F-type connector. The power module is equipped with an RJ45 output jack that allows for easy connection to the network via CAT5e (or better) cable. Additionally, logic input screw terminals accept an external switch for connection to the Dante™ network. The microphone can be configured using the dedicated Dante Mic Component processing object in Tesira software. The ATND8734 is supported by Tesira SERVER & SERVER IO (with DAN-1 card) and TesiraFORTÉ Dante enabled models.

Full specifications and manuals are available at audio-technica.com

When this microphone is used with Tesira software it will override local control, causing the audio to remain on and the red/green LED status indicator, low-cut filter and input gain level to be controlled remotely. In Remote mode the microphone’s user switch can be programmed to trigger functions on compatible Dante-enabled devices. When in remote mode the Remote LED is illuminated. For full routing capabilities the use of Audinate Dante Controller software is required. Please review the Dante Network Considerations section for more details.

Tesira supports both the ATND8734 and ATND8734a Dante-enabled microphones.

Features

• Connects directly to network via Ethernet cable—no soldering or additional cable required
• TB3M-type input for quick mounting of gooseneck and hanging microphone
• Red/green LED status indicator
• Input gain, low-cut filter and LED indicator ring are controlled remotely
• Logic input accepts external switch for connection to the Dante™ network