Partition Connector Logic Receiver

Partition connectors are used to transmit logic signals between different Partitions. Each partition connector consists of a transmitter and one or more receivers.

Initialization Dialog

Name	Description
Logic Channel Count	The number of logic channels to be added

 

DSP Block Representation

DSP Block

The Partition Connector Logic Transmitter receives logic signals from a Partition Connector Logic Transmitter in a different partition. The transmitter and receiver must be linked to each other, and this can be accomplished either from the Partition Connector Logic Receiver dialog box (see Partition Connecter Logic Receiver ) or from the System View window.

System View Window Representation

Right-clicking on the output arrow port of the PCRx Logic Partition Connector block in the Partition tab will show a Go to transmitter option. This can be used to bounce to the partition hosting the associated transmitter.

 

Control Dialog

If the System View window is not used to associate the receive block to the transmitter, the Control Dialog can be used to associate the two. The left side of the Control Dialog displays the channels of this Partition Connector Logic Receiver block. The right side of the Control Dialog displays the channels of all available Partition Connector Transmitter blocks in other partitions. Clicking on a receiver port and then click on a transmitter port will create a link between them.