SERVER
The Tesira SERVER delivers highly scalable processing that can grow over time with the needs of the end customer — with up to eight DSP-2 cards in a single chassis.
The SERVER supports a maximum of (2) AVB-1 cards. The SERVER ships with (1) AVB card and can additionally have either: a second AVB-1 card or (1) SCM-1 CobraNet card, (1) Dante card or (1) analog Tesira I/O card of any type added in the second I/O card slot.
The SERVER is built for maximum flexibility, enabling I/O devices to be located at end points. Any I/O device can harness available processing.
An integral network card provides redundant network connection for configuration setup and control of the Tesira network as well as GPIO connection.
The Tesira SERVER acts as the host device for Tesira EX-MOD, Expander Hardware and EX-LOGIC devices.
Features
- Supports up to 8 DSP-2 cards
- Configured with a SNC-2 (prior to march 2014) or SNC-2a by default to enable network communications.
- 420 x 420 channels of I/O per AVB-1 card
- Optional 32 x 32 CobraNet audio networking using the SCM-1 card
- Supports Dante - Optional 64 x 64 Dante audio networking using the DAN-1 card
- Configuration and control networking over Ethernet
- Supports network redundancy
Local GPIO connections - used for Logic IO
- Front panel LCD display for device and system information
- Signal processing via intuitive software allows configuration and control for: signal routing and mixing, equalization, filtering, dynamics, delay and much more
- Extensive expansion devices (Input, Output, Logic, etc) available as part of the Tesira digital audio networking platform
- CE marked, UL listed, RoHS compliant
Front Panel LED indicators
LED |
Off |
Green |
Yellow |
Red |
Power |
Unit is not powered |
Unit is powered |
Not applicable |
Not applicable |
Alarm |
No Fault is active in the device |
Not applicable |
Minor fault is active in the device |
Major fault is active in the device |
Activity |
Not applicable |
The Host device is an active part of an active system |
Not applicable |
The Host device is part of an inactive system |
Status |
Not applicable |
Device has received its configuration and is ready to participate in the system |
Device is ready and waiting to receive a configuration |
Device is not ready to receive its configuration |
AIS (Alarm In System |
No faults active in any device in the system |
Not applicable |
Minor fault is active in a device in the system |
Major fault is active in a device in the system |