After initial programming & configuration,Tesira systems may be controlled by RS-232 communication from third-party control systems, such as AMX®or Crestron®, using a Serial Control Port or Ethernet Connection.
Tesira can be controlled via the control dialogs in the Tesira software, or via third-party controllers using RS-232, Telnet or Secure Shell Console (SSH).
The ability for Tesira Server, Server IO, Tesira Amplifiers or TesiraFORTÉ devices to use Telnet or SSH can be enabled or disabled via a DEVICE TTP command or in the Device Maintenance Settings > Network Settings dialog.
A Tesira Text Protocol (TTP) is used to interface to third party controllers.