Voltera D & DM Amplifier Blocks

Status Attributes

Please refer to the TTP Overview section for more details on the controlling Tesira devices using the TTP protocol.

Each element of the command instruction is delimited by one or more spaces. The commands are case sensitive and upper and lower case characters are used.

The TTP string to adjust a DSP object attribute is structured in the following order:

Instance_Tag Command Attribute [Index] [Value] LF

Instance Tag: Is always required. Review the Instance Tag section for more details.
Command: Is always required. Review the Command section for more details.
Attribute: Is always required. Review the Attribute section for more details.
[Index]: Is shown in [Brackets] as may be required depending on the Attribute being referenced. If not required it should not be defined. Depending on the Attribute, it can be made up of one or more indexes. Please refer to the Index section for more details.
[Value]: Is shown in [Brackets] as may be required depending on the Command or Attribute being referenced. If not be required it should not be defined. The Value would not normally have spaces, if it does it can be defined in "double quotes". It can also be a numerical value. Please refer to the Value section for more details.
LF: A Line feed or Carriage Return is used to define the end of the command.

Instance Tag	Attribute Code	Command	Index	Value
VDAmp1	level	set	1	-3.0

Reason Code	Attribute Code	Command	Indexes	Value Range
Amplifier Fault Indicator	ampFault	get / subscribe / unsubscribe		false, true
Amplifier Warning Indicator	ampWarning	get / subscribe / unsubscribe		false, true
Input Label	inputLabel	get / set	channel
User Input dB	level	get / set / subscribe / unsubscribe	channel	minLevel - maxLevel dB
User Input Percent	levelPercent	get / set / subscribe / unsubscribe	channel	minLevel - maxLevel percent
User Input Mute	mute	get / set / subscribe / unsubscribe	channel	false, true
Mute All	muteAll	get / set / subscribe / unsubscribe		false, true
Amplifier Output Clipping	outputClip	get / subscribe / unsubscribe		false, true
Loudspeaker Output dB	outputLevel	get / subscribe / unsubscribe	channel	minLevel - maxLevel dB
All Loudspeaker Output Levels	outputLevels	get / subscribe / unsubscribe
Output Label	outputLabel	get / set	channel
Power Profile Info	powerProfile	get		LIVE_PERFORMANCE LIVE_GREEN

Services

Service	Service Code	Parameters
Sleep Device	sleep
Wake Devie	wake