SHURE Mic Block

Please refer to the TTP Overview section for more details on the controlling Tesira devices using the TTP protocol.

Each element of the command instruction is delimited by one or more spaces. The commands are case sensitive and upper and lower case characters are used.

The TTP string to adjust a DSP object attribute is structured in the following order:

Instance_Tag Command Attribute [Index] [Value] LF

Instance Tag: Is always required. Review the Instance Tag section for more details.
Command: Is always required. Review the Command section for more details.
Attribute: Is always required. Review the Attribute section for more details.
[Index]: Is shown in [Brackets] as may be required depending on the Attribute being referenced. If not required it should not be defined. Depending on the Attribute, it can be made up of one or more indexes. Please refer to the Index section for more details.
[Value]: Is shown in [Brackets] as may be required depending on the Command or Attribute being referenced. If not be required it should not be defined. The Value would not normally have spaces, if it does it can be defined in "double quotes". It can also be a numerical value. Please refer to the Value section for more details.
LF: A Line feed or Carriage Return is used to define the end of the command.

Reason Code	Attribute Code	Command	Indexes	Value Range
Channel Name (Dante 'RX Channel Label')	channelName	get / set	channel	Case-insensitive, up to 31 characters except '=' '.' '@' '\' '<' '>'
Device Name (Dante 'Hostname of TX Device')	deviceName	get subscribe unsubscribe	channel
All Device Names (Dante 'Hostnames of all TX Devices')	deviceNames	get subscribe unsubscribe
Invert	invert	get/set/toggle	channel	false, true
Level	level	get / set increment decrement subscribe unsubscribe	channel	minLevel - maxLevel dB
All Levels	levels	get subscribe unsubscribe
Max Level	maxLevel	get / set increment decrement	channel	minLevel - 12.0 dB
Microphone Model	micModel	get		MXA910 MXA310 ANYTYPE
Min Level	minLevel	get / set increment decrement	channel	-100.0 - maxLevel dB
Mute	mute	get / set toggle subscribe unsubscribe	channel	false, true
All Mute States	mutes	get subscribe unsubscribe
Channel Count	numChannels	get		1 - 64
Peak Occurring	peak	get subscribe unsubscribe	channel	false, true
All Peaks	peaks	get subscribe unsubscribe