AEC Processing Block

The following attribute tables that relate to any AEC processing Blocks.

Please refer to the TTP Overview section for more details on the controlling Tesira devices using the TTP protocol.

Each element of the command instruction is delimited by one or more spaces. The commands are case sensitive and upper and lower case characters are used.

The TTP string to adjust a DSP object attribute is structured in the following order:

Instance_Tag Command Attribute [Index] [Value] LF

Instance Tag: Is always required. Review the Instance Tag section for more details.
Command: Is always required. Review the Command section for more details.
Attribute: Is always required. Review the Attribute section for more details.
[Index]: Is shown in [Brackets] as may be required depending on the Attribute being referenced. If not required it should not be defined. Depending on the Attribute, it can be made up of one or more indexes. Please refer to the Index section for more details.
[Value]: Is shown in [Brackets] as may be required depending on the Command or Attribute being referenced. If not be required it should not be defined. The Value would not normally have spaces, if it does it can be defined in "double quotes". It can also be a numerical value. Please refer to the Value section for more details.
LF: A Line feed or Carriage Return is used to define the end of the command.

Instance Tag	Command	Attribute Code	Value
Aec1	get	aecEnable	1

Confirm processing on Aec1 Instance tag is enabled

Example

Aec1 get aecEnable 1 +OK "value":true

Reason Code	Attribute Code	Command	Indexes	Value Range
AEC Enabled	aecEnable	get set toggle	channel	false, true
Bypass AGC	agcBypass	get set toggle	channel	false, true
Hold Time	holdTime	get set increment decrement	channel	0 - 350000 s
HPF Bypass	hpfBypass	get set toggle	channel	false, true
HPF Center Freq.	hpfCutoff	get set increment decrement	channel	20.0 - 500.0 Hz
Invert	invert	get set toggle	channel	false, true
Level	level	get set increment decrement subscribe unsubscribe	channel	minLevel - maxLevel dB
All Levels	levels	get subscribe unsubscribe
Limiter Enabled	limiterEnable	get set toggle	channel	false, true
Max Attenuation	maxAttenuation	get set increment decrement	channel	0.0 - 12.0 dB
Max Gain	maxGain	get set increment decrement	channel	0.0 - 12.0 dB
Max Gain Adj. Rate	maxGainAdjRate	get set increment decrement	channel	0.0 - 5.0 dB/s
Max Level	maxLevel	get set increment decrement	channel	minLevel - 12.0 dB
All Meter States	meters	get subscribe unsubscribe	channel
Min Level	minLevel	get set increment decrement	channel	-100.0 - maxLevel dB
Min SNR	minSnr	get set increment decrement	channel	10.0 - 50.0 dB
Min Threshold	minThreshold	get set increment decrement	channel	-30.0 - 10.0 dBu
Mute	mute	get set toggle subscribe unsubscribe	channel	false, true
All Mute States	mutes	get subscribe unsubscribe
Nonlinear Processing Mode	nlpMode	get set	channel	NLPMODE_NONE, NLPMODE_LOW, NLPMODE_MEDIUM, NLPMODE_HIGH
Noise Reduction	nrdMode	get set	channel	OFF, LOW, MED, HIGH
Channel Count	numChannels	get		1 - 24
Speech Mode	speechMode	get set toggle	channel	false, true
Target Level	targetLevel	get set increment decrement	channel	-10.0 - 10.0 dB