Tone Generator Block

Please refer to the TTP Overview section for more details on the controlling Tesira devices using the TTP protocol.

Each element of the command instruction is delimited by one or more spaces. The commands are case sensitive and upper and lower case characters are used.

The TTP string to adjust a DSP object attribute is structured in the following order:

Instance_Tag Command Attribute [Index] [Value] LF

Instance Tag: Is always required. Review the Instance Tag section for more details.
Command: Is always required. Review the Command section for more details.
Attribute: Is always required. Review the Attribute section for more details.
[Index]: Is shown in [Brackets] as may be required depending on the Attribute being referenced. If not required it should not be defined. Depending on the Attribute, it can be made up of one or more indexes. Please refer to the Index section for more details.
[Value]: Is shown in [Brackets] as may be required depending on the Command or Attribute being referenced. If not be required it should not be defined. The Value would not normally have spaces, if it does it can be defined in "double quotes". It can also be a numerical value. Please refer to the Value section for more details.
LF: A Line feed or Carriage Return is used to define the end of the command.

Instance Tag	Command	Attribute Code	Value
ToneGenerator1	set	sweepEnable	true

Reason Code	Attribute Code	Command	Value Range
Frequency	frequency	get / set increment decrement	20.0 - 20000.0 Hz
Frequency Increment	frequencyInterval	get / set	OCTAVE_1, OCTAVE_2_3, OCTAVE_1_3, OCTAVE_1_6, OCTAVE_1_12, OCTAVE_1_24, OCTAVE_1_48, OCTAVE_1_96
Level	level	get / set increment decrement	minLevel - maxLevel dBu
Max Level	maxLevel	get / set increment decrement	minLevel - 36.0 dBu
Min Level	minLevel	get / set increment decrement	-100.0 - maxLevel dBu
Mute	mute	get / set toggle	false, true
Sweep Enabled	sweepEnable	get / set toggle	false, true
Sweep Start Frequency	sweepFrequencyStart	get / set increment decrement	20.0 - 20000.0 Hz
Sweep Stop Frequency	sweepFrequencyStop	get / set increment decrement	20.0 - 20000.0 Hz
Sweep Increment Time	timeInterval	get / set increment decrement	10 - 60000 ms