NPX Paging Stations

 

The following NPX Paging Station Device Maintenance actions require Windows 10 Version 1809 or newer:

• Firmware Updates
• Network Settings
• Upload and Download of Preambles and Recordings
• Device Security Settings
• Device Description
• Add/Modify/Remove Station PIN

To remove Page Codes and create or update a Tesira layout that includes NPX, the user may use Windows 7 or versions of Windows 10 older than 1809.

 

NPX H1040/G1040

The NPX H1040/G1040 are 4-button convenience paging stations with a handheld or gooseneck microphone for use in Tesira® and Qt® X systems. Each features embedded DSP and on-board memory to support stored message playback and customized preambles. The NPX H1040/G1040 store up to four user-configurable page codes and up to 10 prerecorded messages. NOTE: Marking Plate provided on the bottom of the unit.

Specifications & Features

• Push-to-talk button with status indication

• Page latch button for hands-free paging (G1040 only)

• Four user-configurable page codes

• Up to 16 software configurable priority paging levels

• Audio and control data transmission via AVB or Dante

• Local digital signal processing

• Supports stored message playback (up to 10 messages)

• 50-minute recording pool for 10 messages

• Local storage of default and/or custom preambles

• K-slot for enhanced security via an optional Kensington®  lock

 

  

 

 

 

NPX H1100/G1100

The NPX H1100/G1100 are 10-button convenience paging stations with a handheld or gooseneck microphone for use in Tesira and Qt X systems. The H1100/G1100 feature embedded DSP and on-board memory to support standard and advanced public address functionality. NPX paging stations can be set up to utilize AVB or Dante® paths for paging content. The NPX H1100/G1100 stores up to 999 user-configurable page codes and up to 10 prerecorded messages. NOTE: Marking Plate provided on the bottom of the unit.

Specifications & Features

• Push-to-talk button with status indication

• Page latch button for hands-free paging (G110 only)

• Up to 999 user-configurable page codes

• Up to 16 software configurable priority paging levels

• Audio and control data transmission via AVB or Dante

• Local digital signal processing

• Supports stored message playback (up to 10 messages)

• 50 minute recording pool for all 10 messages

• Local storage of default and/or custom preambles

• K-slot for enhanced security via an optional Kensington® lock

 

 

LCD Navigation Buttons

Up, Down and Select navigation buttons adjacent to the LCD allows the user to navigate the system of menus that establish the user interface for the NPX device:

Keypad Functionality

4-Button

               

                        NPX H1040/G1040 4-Key Keypad

4-Button

The 4-button station allows up to four page codes to be assigned (one for each of the four buttons A,B,C,D).

• To unlock a station that has a PIN authorization, the user must repeatedly press the same key to cycle through the numbers for that key and then stops for 1.5 seconds and the displayed number is locked in.

Button ‘A’ : is used to enter the number 1, 2 or 3

Button ‘B’ : is used to enter the number 4, 5 or 6

Button ‘C’ : is used to enter the number 7, 8 or 9

Button ‘D’ : is used to enter the number 0

• To enter the PIN 4289 the user types the following sequence:

B, , A, A, , C, C, , C, C, C,

 

10-Button

                       NPX H1100/G110010-Key Keypad

 

 

The 10-button station allows up to 999 page codes to be assigned. Users can search for a page code by typing in the page code number on the keypad, or by navigating to the next/previous page code with the top two navigation buttons. A 4-digit PIN code is required if the station is locked.

 

 

NPX supports 10 push buttons for the 10-key and 4 push buttons for the 4-key as shown in the table below:

 

TYPE	BUTTONS	FUNCTION
10-Key Keypad	0,1,2,3,4,5,6,7,8,9	Page Code Assignments
4-Key Keypad	A, B,C,D 0,1,2,3,4,5,6,7,8,9	Page Code Assignments PIN Code (numbers)