SERVER-IO

The Tesira® SERVER-IO is a digital network server for use with the Tesira digital audio networking platform. It is factory configured with (1) DSP-2 card and is capable of handling up to (3) DSP-2 cards per chassis. The SERVER-IO allows a maximum of (1) AVB-1 card per chassis. The SERVER-IO allows a maximum of (2) SCM-1 CobraNet cards per chassis. The SERVER-IO allows a maximum of (2) DAN-1 Dante cards per chassis.

The following restrictions apply to the SERVER-IO:

• SERVER-IO with AVB: An AVB card can only be populated in slot 13. SCM-1 and/or DAN-1 card(s) can only be populated in slots 11 or 12.
• SERVER-IO without AVB: SCM-1 and/or DAN-1 cards can be populated in slots 11, 12, or 13. A maximum of 2 of each type are allowed (as an example 3x SCM-1 or DAN-1 is not allowed).

The SERVER-IO can support up to (12) standard Tesira I/O cards for up to (48) channels of audio I/O (e.g. mic and line level, VoIP, and telephone interface). The on-board DSP features two new Biamp algorithms, SpeechSense™ and AmbientSense™, both of which enhance speech processing by more accurately distinguishing between human speech and noise. The DSP also provides extensive audio processing, including but not limited to: signal routing and mixing, equalization, filtering, dynamics, and delay as well as control, monitoring and diagnostic tools; all configured through the Tesira design software.

An integral Ethernet network card SNC-1 provides redundant network connectivity for configuration and control of the Tesira network as well as GPIO connection.

The Tesira SERVER-IO acts as the host device for Tesira EX-MOD, Expander Hardware and EX-LOGIC devices.

Allowable I/O configurations may be confirmed using the "Tesira SERVER-IO Order Form" available at Biamp.com on the Tesira downloads page.

BENEFITS

• Offers flexibility to have scalable DSP and I/O in the same device
• Enables I/O to be distributed from a central location
• Customizable I/O configurations for easy right-sizing of system design
• Control networking can run on separate (existing) Ethernet network

FEATURES

• Supports up to 3 DSP-2 cards
• Configured with a SNC-1 by default to enable network communications.
• Up to 12 I/O cards with a maximum of 48 channels of audio including:
• • SEC-4 - 4 Channel Acoustic Echo Cancellation card (also includes AGC and ANC)
  • SAC-4 - 4 Channel Ambient Noise Compensation card
  • SIC-4 - 4 channel Mic Line Input Card
  • SOC-4 - 4 channel Mic Line Output Card
  • STC-2 - 2 Line Telephone Interface card
  • SVC-2 - 2 Line VoIP Interface card
  • Note - Up to 6 telephony cards (STC-2, SVC-2) can be used in any combination, per SERVER-IO

• Up to 420 x 420 channels of digital I/O using AVB-1 card (only 1 allowed per SERVER-IO chassis)
• Supports optional 32 x 32 CobraNet audio networking using SCM-1 card (up to 2 allowed per SERVER-IO chassis)
• Supports up to 128 x 128 channels of Dante audio using DAN-1 cards (up to 2 allowed per SERVER-IO chassis)
• System configuration and control via Ethernet or serial connection
• Local General Purpose Input/Output (GPIO) connections
• Front panel OLED display for device and system information
• New processing algorithms: SpeechSense and AmbientSense
• Signal processing via intuitive software allows configuration and control for:
• signal routing and mixing, equalization, filtering, dynamics and delay and much more
• Rack mountable (3RU)