Partition Connector Video to Audio Receiver
the Video to Audio Partition Connector blocks share the audio portion of AV Streams between Video and Audio partitions. The Video to Audio Partition Connector Receive Block is used to break out the audio stream from a Video partition. If an audio stream is received that does not match the format of the block (for example, a block with 5.1 format receives a 7.1 audio stream) the stream received will be up/down mixed to a matching format before the channels are broken out.
Initialization Dialog
| Name | Description |
| Stream Format | Specifies the channel format of the audio stream |
DSP Block Representation
DSP Block
The following output nodes on the Stereo, 5.1 and 7.1 blocks, where available, represent the following:
| Name | Description |
| L | Left |
| R | Right |
| LFE | Low Frequency Effects |
| C | Center |
| Lr | Left Rear |
| Rr | Right Rear |
| Ls | Left Surround |
| Rs | Right Surround |
System View Window Representation
Once a PCRx Video to Audio partition connector is placed in an Audio Partition, a matching representational block appears in the “System View” docking window. Drawing wires from one partition connector to another will link the two connectors. This block will have a single AV Stream port, regardless of the stream format chosen, as it sends a single stream, regardless of the number of channels within the stream.
These stream transmitter ports can come from Video Partition Transmitter blocks or Audio to Video Partition Transmitter blocks.
Right-clicking on the output arrow port of the PCRx Video to Audio Partition Connector block in the Partition tab will show a Go to transmitter option. This can be used to bounce to the partition hosting the associated transmitter.
Control Dialog
If the System View window is not used to associate the transmitter block to the receiver, the Control Dialog can be used to associate the two. The left side of the Control Dialog displays the channels of this Partition Connector Video Receiver block. The right side of the Control Dialog displays the available Partition Connector Transmitter blocks in other partitions. Clicking on a receiver port and then click on a transmitter port will create a link between them.
PCRx Audio Receive dialog once the PCTx Video connector has been linked to it.
