Partition Connector Audio to Video Transmitter

the Audio to Video Partition Connector blocks share the audio portion of AV Streams between Audio and Video partitions. The Audio to Video Partition Connector Transmit Block is used to combine and transmit the stream to the Video partition.

Initialization Dialog

Name	Description
Stream Format	Specifies the channel format of the audio stream

 

DSP Block Representation

DSP Block

The following input nodes on the Stereo, 5.1 and 7.1 blocks, where available, represent the following:

Name	Description
L	Left
R	Right
LFE	Low Frequency Effects
C	Center
Lr	Left Rear
Rr	Right Rear
Ls	Left Surround
Rs	Right Surround

 

System View Window Representation

Once a PCTx Audio to Video partition connector is placed in an Audio Partition, a matching representational block appears in the “System View” docking window. Drawing wires from one partition connector to another will link the two connectors. This block will have a single AV Stream port, regardless of the stream format chosen, as it sends a single stream, regardless of the number of channels within the stream.

Right-clicking on the output arrow port of the PCTx Audio to Video Partition Connector block in the Partition tab will show a Show All Receivers in System View option. This can be used to highlight the receive blocks in the partitions hosting the associated receivers.

Control Dialog

If the System View window is not used to associate the transmitter block to the receiver, the Control Dialog can be used to associate the two. The left side of the Control Dialog displays the channels of this Partition Connector Video Receiver block. The right side of the Control Dialog displays the available Partition Connector Transmitter blocks in other partitions. Clicking on a receiver port and then click on a transmitter port will create a link between them.

PCRx Video Receive dialog once the PCTx Video connector has been linked to it.