Partition Connector Audio Transmitter

Partition connectors are used to transmit audio signals between different Partitions. Each partition connector consists of a transmitter and one or more receivers.

Initialization Dialog

Name	Description
Channel Count	The number of audio channels to be added

 

DSP Block Representation

DSP Block

The Partition Connector Audio Transmitter transmits audio signals to a Partition Connector Audio Receiver in a different partition. The transmitter and receiver must be linked to each other, and this can be accomplished either from the Partition Connector Audio Receiver dialog box (see Partition Connecter Audio Receiver ) or from the System View window.

System View Window Representation

The Partition Connector View tab of the System View window shows all available partition connector transmitters and receivers.  Drawing wires from one partition connector to another will link the two connectors.  Partition Connector Transmitters can transmit to more than one receiver.

Right-clicking on the output arrow port of the PCTx Audio block in the Partition tab will show a Show all receivers in System View option, this can be used to find and highlight the receiver blocks in other partitions

Control Dialog

If the System View window is not used to associate the transmitter block to the receiver, the Receive Control Dialog on the other partition can be used to associate the two. The PCTx Audio Control Dialog will then display the Streams of this Partition Connector block.