System Status

Tesira System Status is reported via the front panel of Tesira Hardware or within the Tesira Software.

For details of Hardware fault status indicators please refer to the Hardware Status Indicators section.

The software reports the system status in the following locations:

• The Faults section of Device Maintenance
• When connected to a system the Status Bar will display a System Status LED representing the current system faults.

• When sending configuration to a system that requires audio to be stopped momentarily.

Please review the Fault Reporting section for full details of the errors reported in a Tesira system.

Fault Types

Green	Blue	Yellow	Red
No Faults	Updating Configuration	Minor device fault active	Major device fault active

 

This status is a composite of all Tesira Server, Server IO, TesiraFORTÉ, Tesira Amplifier and remote devices in the system. If any device in the system has a fault, this will display the severest fault level (i.e. if the system has a major and minor fault, this will be red). The control will update itself as faults occur or are corrected.

Examples

Sending configuration that requires audio to be stopped briefly in Partition 2:

System Status with no faults:

System Status with audio delivery faults:

Expander fault reporting

Tesira Server with an EX-Mod proxied to it that is not on the network.