Parlé/AMP-450P/AMP-450BP

Status Attributes

Refer to the TTP Overview section for more details on the controlling Tesira devices using the TTP protocol.

Each element of the command instruction is delimited by one or more spaces. The commands are case sensitive; upper and lower case characters are used.

The TTP string to adjust a DSP object attribute is structured in the following order:

Instance_Tag Command Attribute [Index] [Value] LF

Instance Tag: Is always required. Review the Instance Tag section for more details.
Command: Is always required. Review the Command section for more details.
Attribute: Is always required. Review the Attribute section for more details.
[Index]: Is shown in [Brackets] as may be required depending on the Attribute being referenced. If not required it should not be defined. Depending on the Attribute, it can be made up of one or more indexes. Please refer to the Index section for more details.
[Value]: Is shown in [Brackets] as may be required depending on the Command or Attribute being referenced. If not be required it should not be defined. The Value would not normally have spaces. If it does it can be defined in "double quotes". It can also be a numerical value. Please refer to the Value section for more details.
LF: A Line feed or Carriage Return is used to define the end of the command.

Reason Code	Attribute Code	Command	Indexes	Value Range
Amplifier Fault Indicator	ampFault	get subscribe unsubscribe		false, true
Amplified Output Mute All Channels	ampMuteAll	get/set/toggle/subscribe/unsubscribe		false, true
Amplified Thermal Fault Indicator	ampThermalFault	get subscribe unsubscribe		THERMAL_NONE THERMAL_WARNING THERMAL_FAULT
Amplifier Warning Indicator	ampWarning	get subscribe unsubscribe		false, true
Amplified Output Clip	clip	get subscribe unsubscribe	channel	CLIP_NONE CLIP_CLIPPING
Amplified Output Invert	invert	get set toggle	channel	false, true
Amplified Output Level	level	get set increment decrement subscribe unsubscribe	channel	minLevel - maxLevel dB
Amplified Output Levels	levels	get/subscribe/unsubscribe
Amplified Output Load Impedance	loadImpedance	get set	channel	LOAD_8_OHMS LOAD_4_OHMS
Amplified Output Max Level	maxLevel	get set increment decrement	channel	minLevel - 0.0 dB
Amplified Output Min Level	minLevel	get set increment decrement	channel	-100.0 - maxLevel dB
Amplified Output Mute	mute	get set toggle subscribe unsubscribe	channel	false, true
Amplified Output Mutes	mutes	get subscribe unsubscribe		Array of booleans
Amplifier Channel Count	numChannels	get		1-4
Amplified Output Protection	protection	get/subscribe/unsubscribe	channel	PROTECTION_NONE PROTECTION_LIMITING PROTECTION_MUTED