Tesira Amplifier - TesiraXEL 1200 Blocks

Status Attributes

Please refer to the TTP Overview section for more details on the controlling Tesira devices using the TTP protocol.

Each element of the command instruction is delimited by one or more spaces. The commands are case sensitive and upper and lower case characters are used.

The TTP string to adjust a DSP object attribute is structured in the following order:

Instance_Tag Command Attribute [Index] [Value] LF

Instance Tag: Is always required. Review the Instance Tag section for more details.
Command: Is always required. Review the Command section for more details.
Attribute: Is always required. Review the Attribute section for more details.
[Index]: Is shown in [Brackets] as may be required depending on the Attribute being referenced. If not required it should not be defined. Depending on the Attribute, it can be made up of one or more indexes. Please refer to the Index section for more details.
[Value]: Is shown in [Brackets] as may be required depending on the Command or Attribute being referenced. If not be required it should not be defined. The Value would not normally have spaces, if it does it can be defined in "double quotes". It can also be a numerical value. Please refer to the Value section for more details.
LF: A Line feed or Carriage Return is used to define the end of the command.

Instance Tag

XAmp1

Reason Code	Attribute Code	Command	Indexes	Value Range
Amplified Output Allowed Power	allowedPowerWatts	get	channel	0-1200
Amplifier Fault Indicator	ampFault	get subscribe unsubscribe		false, true
Amplifier Fault String	ampFaultString	get subscribe unsubscribe		String indicating amplifier default
Amplifier Mute All Channels	ampMuteAll	get set toggle subscribe unsubscribe		false, true
Amplifier Warning Indicator	ampWarning	get subscribe unsubscribe		false, true
Amplified Output Auto Mute Threshold	automuteThreshold	get set increment decrement	channel	-100.0 - 0.0
Amplified Output Auto Mute Timeout	automuteTimeout	get set	channel	AUTOMUTE_TIMEOUT_DISABLED, AUTOMUTE_TIMEOUT_15, AUTOMUTE_TIMEOUT_30, AUTOMUTE_TIMEOUT_45, AUTOMUTE_TIMEOUT_60
Amplified Output Expected Load	expectedLoad	get	channel	EXPECT_4_OHMS, EXPECT_8_OHMS, EXPECT_70_V, EXPECT_100_V
Front Panel Lock	frontPanelLock	get set toggle subscribe unsubscribe		false, true
Amplified Output Input Clipping	inputClip	get set subscribe unsubscribe	channel	false, true
Amplified Output Input Meter	inputLevel	get subscribe unsubscribe	channel	-100.0 - 36.0 dBu

Amplified Output Invert	invert	get set toggle	channel	false, true
Amplified Output High Pass Filter Enable	highPassFilterEnable	get set toggle		false, true
Amplified Output Level	level	get set increment decrement subscribe unsubscribe	channel	minLevel - maxLevel dBu
Amplified Output Limiter Attenuation	limiterAttenuation	get subscribe unsubscribe	channel	LIMITER_ATTENUATION_NONE LIMITER_ATTENUATION_LIMITING LIMITER_ATTENUATION_CLIPPING
Amplified Output Impedance	impedance	get subscribe unsubscribe	channel	IMPEDANCE_NONE, IMPEDANCE_LOWZ, IMPEDANCE_SHORT IMPEDANCE_OPEN
Amplified Output Level Max	maxLevel	get set increment decrement	channel	minLevel - 0.0 dBu
Amplified Output Level Min	minLevel	get set increment decrement	channel	-100.0 - maxLevel dBu
Amplified Output Mute	mute	get set toggle subscribe unsubscribe	channel	false, true
Amplified Output Clipping	outputClip	get subscribe unsubscribe	channel	false, true
Amplified Output Meter	outputLevel	get subscribe unsubscribe	channel	-100.0 - 36.0
Amplified Output Protection	protect	get subscribe unsubscribe	channel	false, true
Amplified Output Fault Reporting Enable	reportingEnable	get set toggle	channel	false, true
Channel Automute Threshold	automuteThreshold	get set increment decrement	channel	-100.0 - 0.0 dB
Amplified Output Thermal Protection	thermal	get subscribe unsubscribe	channel	THERMAL_NONE THERMAL_WARNING THERMAL_FAULT