Ducker Block

Please refer to the TTP Overview section for more details on the controlling Tesira devices using the TTP protocol.

Each element of the command instruction is delimited by one or more spaces. The commands are case sensitive and upper and lower case characters are used.

The TTP string to adjust a DSP object attribute is structured in the following order:

Instance_Tag Command Attribute [Index] [Value] LF

Instance Tag: Is always required. Review the Instance Tag section for more details.
Command: Is always required. Review the Command section for more details.
Attribute: Is always required. Review the Attribute section for more details.
[Index]: Is shown in [Brackets] as may be required depending on the Attribute being referenced. If not required it should not be defined. Depending on the Attribute, it can be made up of one or more indexes. Please refer to the Index section for more details.
[Value]: Is shown in [Brackets] as may be required depending on the Command or Attribute being referenced. If not be required it should not be defined. The Value would not normally have spaces, if it does it can be defined in "double quotes". It can also be a numerical value. Please refer to the Value section for more details.
LF: A Line feed or Carriage Return is used to define the end of the command.

Instance Tag	Command	Attribute Code
Ducker1	get	attackTime

Example

Ducker1 get attackTime

Attribute	Attribute Code	Commands	Value Range
Attack Time	attackTime	get / set increment decrement	0.1 - 2000.0 ms
Bypass	bypass	get / set toggle	false, true
Ducking Level	duckingLevel	get / set increment decrement	-100.0 - 0.0 dB
Input Level	inputLevel	get / set increment decrement	-100.0 - 12.0 dB
Input Mute	inputMute	get / set toggle	false, true
Logic In Enabled	logicInEnable	get / set toggle	false, true
Logic In Inverted	logicInInvert	get / set toggle	false, true
Logic Out Enabled	logicOutEnable	get / set toggle	false, true
Logic Out Inverted	logicOutInvert	get / set toggle	false, true
Max Input Level	maxInputLevel	get / set increment decrement	minInputLevel - 12.0 dB
Min Input Level	minInputLevel	get / set increment decrement	-100.0 - maxInputLevel dB
Mix Sense Enabled	mixSense	get/set toggle	false, true
Release Time	releaseTime	get / set increment decrement	0.1 - 40000.0 ms
Sense Level	senseLevel	get / set increment decrement	-100.0 - 12.0 dB
Sense Mute	senseMute	get / set toggle	false, true
Threshold	threshold	get / set increment decrement	-60.0 - 24.0 dBu